Hometel Lebanon : Electrical Cabinets

Our cabinets are composed of 4 parts

1 - Main Body

Folded and welded. 4 off 20 mm diameter x 4 mm deep depressions are pressed out with an 9 mm diameter hole.
Our standard cabinets come without side perforation.
Our cabinets are equipped with 1 press weld stud for earth kit.

2 - Door

Surface mounted with a 120° opening.
Concealed removable hinges with captive pins.
A press weld stud earth kit is available on the right bottom of every door
Sealing is ensured by an extruded one piece polyurethane gasket.
Lock: standard double bar lock (wing shaped handle)

3 - Mounting plate

Fixed onto M6/M8 press weld studs to the rear of the enclosure (4 or 6 depending on the cabinet dimensions).
All sides are strengthened by folded edges.

4 - Gland opening plate

Situated at the rear bottom of the enclosure to accommodate easy cabling onto the mounting plate

Finish

body, door and gland plate : grey Ral 7032
Mounting plate : orange Ral 2000

Electrical Cabinet Disassembeled parts
Main Body	Door	Mounting plate
Gland opening plate		Lock

We provide custom made cabinets for our customer:

Backless cabinets.
Side perforated cabinets.
Cabinets with integrated battery base.
Special dimensions cabinet.
Specially perforated mounting plate cabinet.
Floor heating cabinets.
Heaters cabinets + accessories. (for pex)

Cabinets Dimensions
Width	Depth	Length	Body Steel Thikness	Door Steel Thikness	Mounting plate Thikness
20	7	30	8/10 mm	8/10 mm	10/10 mm
20	12	30
20	16	30
30	16	40
30	20	40
40	16	60		10/10 mm	12/10 mm
40	20	60
50	20	70
63	20	70
60	20	80	10/10 mm
60	33	80
70	33	80
80	20	100		12/10 mm
80	33	100
80	25	120
80	33	120